How to Inflate Your Honda Accord 2013 Tires

Tires play an essential role in how well your Honda Accord handles, ride comfort and
fuel economy. Make sure they remain properly inflated and in great condition.
If your TPMS light illuminates, one or more of your tires have low air pressure. Use
an accurate tire gauge to check all four (including the spare) at once when they are
cold.

Honda Accord 2013 Tires
Honda Accord 2013 Tires

Honda Accord 2013 Tires Size

Your tires are an integral component of your car. They play an essential role in
responding to responsiveness, traction and efficiency as well as saving money at the
gas station while improving handling & safety on the road. By inflating them to their
recommended PSI levels you could save both money and increase safety on the
road.
Your Honda Accord 2013 Tires should come equipped with the suggested tire pressure
printed on their sidewall in either pounds per square inch, bar, or kilopascals
(kilopascals). A tire pressure gauge is recommended to check air pressure when
Honda Accord 2013 Tires are cold.
Tires are comprised of many complex parts that work together. This includes tread,
belts, plies, sidewall, inner liner bead filler and cord body components. While tread
grips the road hard when driving along with rubber gripper Honda Accord 2013 Tires, flexible sidewalls help absorb shock when hit. Discover more about your tires’ materials by reading up
on their specifications or specs listed on their sidewall – treadwear ratings
(traction/temperature grades), treadwear ratings as well as temperature grade
levels provide insight into lifespan as well as performance/performance
specifications will give insight.

Tire Pressure

Your vehicle’s owner’s manual or tire placard contains information regarding your
tires’ ideal pressure levels, either measured in pounds per square inch (psi), bars or
kilopascals (kPa).
Correct air pressure promotes even wear, improves traction and fuel efficiency as
well as decreasing risk of tire blowout while increasing driving comfort.
Underinflated Honda Accord 2013 Tires reduce in diameter and become more susceptible to tread separation and punctures; to avoid this scenario, make sure your tire pressure is
checked often with a tire pressure gauge.
Tires typically last three years on average depending on their type and usage. To
get the most from your tires, be sure to come into Coggin Honda Jacksonville
regularly for a tire inspection and advice that could make their life span longer. Our
free service offers comprehensive inspections as well as advice to extend their
longevity.

TPMS

TPMS monitors each tire’s pressure and alerts drivers if any fall below their
recommended air pressure levels. It accomplishes this through sensors placed within
each tire that communicate with its computer; and can detect slow leaks (for
instance a penny falling into tread space) as well as sudden air loss caused by
temperature fluctuations.
When your dashboard displays the TPMS symbol, it’s advisable to drive to a gas
station and fill your Honda Accord 2013 Tires to their recommended pressure levels. This should help reset the sensor battery, eliminating its appearance on your dashboard and
disabling it altogether.
If the Tire Pressure Monitoring System (TPMS) warning light remains illuminated
after checking and refilling tire pressures, its battery may have died. If this is the
case, a new sensor must be purchased to reset its warning light; referring to your
owner’s manual’s calibration instructions may help with this task; generally driving
at speeds between 31 to 62 miles per hour for 18 minutes is sufficient to calibrate TPMS sensors.

Tire Calibratio

Your TPMS system must be calibrated whenever the air pressure in any of your Honda Accord 2013 Tires changes, when rotating them or replacing them, or whenever pressing a tire
pressure gauge against their valve stem and verifying its reading is within
recommended psi limits (you can also look in your driver’s door jamb sticker or
owner’s manual for guidance). To calibrate, press a tire pressure gauge against its
valve stem while pressing against its valve stem with your thumb to make sure its
reading matches up with what should be. You can do this using a pressure gauge
pressurised against its valve stem while pressing against its stem until its reading
matches up with what should be. (You can check suggested pressure from there or
within owner’s manuals). To do this step press a tire pressure gauge against its
valve stem, pressing against its valve stem while checking its reading matches what
should be shown to ensure you reach optimal psi levels by checking inside driver
door jamb or owner’s manual stickers.) Honda Accord 2013 Tires!
If the TPMS indicator light continues to illuminate after checking and refilling your
tires to their appropriate psi, turn your ignition to P. Then press the TPMS Calibration
button on your in-vehicle display or driver information interface.
This process may require up to 30 minutes of driving at least 30 mph before the
indicator light shuts off and system reset. When complete, always monitor tire
pressure with an accurate gauge and ensure tire is cold before driving it again.

Leave a Comment

We use cookies in order to give you the best possible experience on our website. By continuing to use this site, you agree to our use of cookies.
Accept